PG-1818V

Automatic Film Applicator Mini with Vacuum Bed

Description:

The automatic film applicator mini with vacuum bed can also be converted into the glass bed version. The replacement of the two beds is done within a few seconds. The vacuum pump is not inside the device and has to be connected externally.

The application speed can be adjusted and is always constant. Due to the special design no vibrations occur during the application, thus a smooth film is guaranteed.

For application any bar coater or film applicator can be used with the instrument.

Usage with vacuum bed:

The substrate to be coated (for example: plastic panels, test chart, plastic film, etc.) is fixated through the vacuum suction. This allows an application over the entire substrate surface.

The vacuum plate is specially made out of 2 parts, so it can be taken out, opend and cleaned easily if paint should drop into the vacuum holes.

Application with a film applicator:

The wet film thickness depends on the used film applicator and the film width depends on the film applicator’s length. Basically all kinds of different film applicators (single, double, four sided, adjustable film applicator, etc.) can be used.

Application with bar coater:

For any wet film thickness you will need an individual bar coater*. It applies on the whole surface area. The bar coater has to have a diameter between 10 – 13 mm and a length of 200 mm.

*Bar Coater available in: 6, 8, 10, 12, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120, 150 or 200 µm.

Features

• Touchscreen
• Instrument can be used with vacuum bed or glass bed
• Vacuum force is adjustable
• Vacuum bed can be separated into two parts: easy to clean the inside, if paint drops into the vacuum holes
• Fixating unit always available, regardless of which bed is installed
• Application speed is adjustable in steps of  1 mm / s
• No vibration during the application, thus smooth film without waves, even at speed of 1 mm / s
• Film applicator / bar coater can be clamped on the device and weights can be added
• Tub for catching excess paint
• 3 bar coaters can be placed on top of the tub
• Film length up to 250 mm; adjustable in 1 mm steps

Technical specifications:

Application speed: 1-200 mm/s

Dimensions Device : 450x300x210 mm

Dimensions Bed: 355x229x10 mm
Recommended max. film dimensions: 320×220 mm

Film length (max.): 250 mm

Film length (least): 5 mm

Bed: Vacuum bed
Weight: Device with vacuum bed: 15 kg; vacuum pump: 5 kg

Wetfilm thickness: Depending on used film applicator/bar coater

Item number: PG-1818V

Scope of delivery:

Device with vacuum bed and external vacuum pump

Equipment:

• PG-1818/P/002: Glass bed – on request

Video:

Automatic film applicator mini

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube immer entsperren

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube immer entsperren